Description
2017 Evinrude E-TEC G2 150HP Outboard
The 2017 Evinrude E-TEC G2 150HP is a 2.7-liter, 66-degree V6 direct-injection two-stroke outboard developed for boats that need strong mid-range torque, responsive acceleration and a compact high-output propulsion package. The 150HP model was part of the E-TEC G2 150–200HP expansion introduced by BRP for the 2017 product period.
BRP’s operator-guide system identifies the 150HP E-TEC G2 as a 66-degree 2.7L V6. Contemporary BRP material also identifies integrated Dynamic Power Steering and i-Trim as available features on the new G2 models, while a 20-inch TRAC+ midsection was offered on 150HP models with i-Trim for customers wanting a lighter package without integrated power steering.
2017 Evinrude E-TEC G2 150HP Key Features
- 150 horsepower Evinrude E-TEC G2 outboard
- 66-degree V6 powerhead
- 2.7-liter displacement
- Direct fuel injection E-TEC combustion technology
- Multi-Point Targeted Oiling
- Integrated engine-management electronics
- Available Dynamic Power Steering
- Available i-Trim intelligent trim system
- Available 20-inch TRAC+ midsection configuration with i-Trim
- 20-inch and 25-inch transom-height configurations documented for the 2.7L G2 platform
- Digital instrumentation and integrated electronic controls on applicable configurations
- Automatic winterization system
- No required break-in period according to BRP’s launch documentation
- Customizable engine appearance available for the G2 family
Evinrude E-TEC G2 150HP Specifications
| Specification | 2017 Evinrude E-TEC G2 150HP |
|---|---|
| Rated output | 150 HP |
| Engine configuration | 66-degree V6 |
| Displacement | 2.7 L |
| Engine technology | E-TEC direct injection, two-stroke |
| Full-throttle operating range | 5,000–6,000 RPM |
| Gear ratio | 2.17:1 |
| Transom configurations | 20-inch and 25-inch platform configurations |
| Steering | Dynamic Power Steering available depending on configuration |
| Trim system | i-Trim available |
| Lubrication | Multi-Point Targeted Oiling |
| Electrical output | 133 A total / 50 A net dedicated on the 2.7L G2 platform |
The 2.7L V6, 5,000–6,000 RPM operating range and 2.17:1 gear ratio are documented for the E-TEC G2 150 platform. Published technical comparison material lists 20- and 25-inch transom-height configurations and 133 amps total / 50 amps net dedicated charging output for the 2.7L G2 platform.
2.7L 66-Degree V6 Powerhead
The E-TEC G2 150HP uses a 66-degree V6 architecture with 2.7 liters of displacement. The V6 layout gives the engine a broad operating range while keeping the package suitable for a wide range of 150HP-class boat installations.
The G2 platform was introduced as an evolution of Evinrude’s direct-injection two-stroke technology. BRP positioned the 150–200HP G2 models around performance, torque, fuel efficiency and emissions improvements compared with leading four-stroke outboards of the period.
E-TEC Direct Fuel Injection
E-TEC technology uses direct fuel injection rather than a conventional carbureted fuel system. The engine management system controls fuel delivery and combustion electronically, allowing the 2.7L V6 to produce its rated output while maintaining the characteristic response of a direct-injected two-stroke.
BRP described the E-TEC G2 family as providing up to 30% more torque and up to 15% better fuel efficiency than leading four-stroke outboards in its comparison material. Those are BRP’s published comparative claims for the product family and should not be treated as a guaranteed result for every boat or operating condition.
Multi-Point Targeted Oiling
The E-TEC G2 uses Multi-Point Targeted Oiling rather than relying on a conventional premixed fuel-and-oil arrangement. The oiling system delivers lubricant to targeted engine areas according to engine operating requirements.
This system is one of the important differences between an E-TEC G2 and older carbureted two-stroke outboards. Correct Evinrude/BRP oil and the specified maintenance procedure should be used for the exact engine model.
Dynamic Power Steering
One of the defining features of the E-TEC G2 design is the ability to integrate steering components into the engine’s midsection. BRP offered Dynamic Power Steering on the 150HP G2 models, reducing the amount of external steering hardware at the transom.
The integrated arrangement can provide a cleaner installation and is particularly useful for boats where transom space and rigging simplicity matter. The exact steering equipment on a used engine should be verified before purchasing because not every 150HP configuration has the same equipment.
i-Trim Intelligent Trim
The Evinrude i-Trim system automatically adjusts engine trim according to operating conditions and boat speed. BRP introduced i-Trim as an intelligent trim feature intended to make the engine easier to operate while helping maintain an appropriate running attitude.
For a used 2017 engine, confirm that the i-Trim components, switches, wiring and associated controls are included if the listing specifically represents an i-Trim-equipped configuration.
TRAC+ Midsection Option
BRP offered a 20-inch TRAC+ midsection on 150HP models with i-Trim for customers who wanted a lighter package without integrated power steering. This configuration is particularly relevant when comparing used Evinrude G2 150HP engines because two engines carrying the same 150HP rating can have different rigging and midsection equipment.
Always confirm the exact model identification and midsection configuration before ordering replacement parts or planning a repower.
5,000–6,000 RPM Operating Range
The published 2.7L E-TEC G2 150 specification lists a 5,000–6,000 RPM full-throttle operating range. Propeller selection should be made so the engine can reach the specified range under the boat’s normal load and operating conditions.
Propeller pitch, diameter, engine mounting height, hull design, boat weight and gearcase condition all affect WOT RPM. A propeller that is appropriate on one 150HP boat may not be correct for another.
2.17:1 Gear Ratio
The 2.7L E-TEC G2 150 platform uses a published 2.17:1 gear ratio. The gear ratio works with the engine’s torque characteristics and propeller selection to convert crankshaft speed into useful propeller thrust.
When buying a used engine, verify the gearcase model and gear ratio rather than assuming every Evinrude 150 uses identical lower-unit components.
Electrical and Charging System
Published technical comparison data for the 2.7L E-TEC G2 platform lists 133 amps total output, with 50 amps net dedicated output. This provides substantial electrical capacity for a boat carrying navigation displays, fishfinders, communications equipment, pumps and other onboard electronics.
Actual available electrical output depends on engine speed and the specific electrical configuration. The boat’s battery, cabling, grounds and circuit protection should be sized for the complete installation.
Applications for a 150HP E-TEC G2
A 150HP E-TEC G2 can be suitable for many recreational boat types, including center consoles, fishing boats, pontoons, aluminum fishing boats, bay boats, flats boats and other hulls designed around 150HP outboard power. BRP specifically referenced bass, pontoon, center-console and aluminum-fishing applications when introducing the expanded G2 range.
Boat suitability still depends on the manufacturer’s maximum horsepower rating, transom design, hull weight and intended use. Do not select a 150HP engine solely by comparing horsepower with an existing motor.
Installation and Repower Considerations
- Confirm the boat is rated for a 150HP outboard.
- Verify whether the engine is a standard G2 150 configuration or another G2 variant.
- Measure the transom height before selecting the shaft configuration.
- Confirm whether the engine has Dynamic Power Steering.
- Verify whether i-Trim is installed and operational.
- Check the gearcase and confirm the 2.17:1 configuration where applicable.
- Use compatible Evinrude electronic controls and instrumentation.
- Confirm the correct oiling system and approved lubricant.
- Inspect fuel lines, filters and the fuel tank before repowering.
- Choose propeller pitch to reach 5,000–6,000 RPM at WOT.
- Verify charging output and battery capacity for the boat’s electrical load.
- Water-test steering, trim, cooling-water pressure and engine performance after installation.
Maintenance and Service
E-TEC G2 engines were designed around simplified scheduled maintenance compared with many traditional outboards. BRP’s launch documentation stated that the G2 family had no dealer-scheduled maintenance for five years or 500 hours and included automatic winterization.
That historical maintenance statement should not be interpreted as meaning a used 2017 engine requires no inspection today. A used engine should be evaluated based on its actual age, operating hours, service history, storage conditions and present condition.
Important inspection areas include the gearcase lubricant, propeller shaft, water pump and cooling system, spark plugs, fuel system, oil system, steering, trim, electrical connectors, battery connections and diagnostic fault history.
Important 2017 Gearcase Recall Check
When purchasing a 2017 Evinrude E-TEC G2, check the engine’s serial number and production date against applicable Evinrude safety recall information. Evinrude issued a recall notice in August 2017 covering certain E-TEC G2 150–300HP models built in June or July 2017 because gearcase and exhaust-housing extension nuts could loosen. The recall notice states that affected components could allow the gearcase assembly to detach and result in loss of steering control.
This does not mean every 2017 E-TEC G2 150HP is affected. It means buyers should verify the exact engine identification and confirm whether any applicable recall work was completed before putting a used engine into service.
Buying a Used 2017 Evinrude E-TEC G2 150HP
Start with the engine’s serial number and model identification. Confirm the year, horsepower, shaft length, midsection configuration, steering system, trim system and gearcase before purchasing.
Inspect the cowling, powerhead, midsection and lower unit for impact damage, corrosion, oil leaks and previous repairs. Check the propeller and propeller shaft for signs of impact, and inspect the transom-mounting area for damage or distortion.
If possible, obtain a diagnostic report and verify operating hours and fault history. A water test should confirm cold starting, idle quality, throttle response, steering, trim, cooling-water pressure, charging output and WOT RPM.
E-TEC G2 150 vs. Traditional Four-Stroke 150
The E-TEC G2 150 differs fundamentally from a conventional four-stroke 150HP outboard. The G2 is a direct-injection two-stroke with Multi-Point Targeted Oiling, while a conventional four-stroke uses a separate crankcase lubrication system and four-stroke combustion cycle.
The G2 architecture was designed to deliver strong torque and responsive acceleration while keeping the engine-management, steering and rigging systems integrated into the outboard. BRP’s contemporary product launch highlighted the G2’s torque, fuel-efficiency and emissions claims compared with leading four-stroke engines of the period.
2017 Evinrude E-TEC G2 150HP FAQs
How much horsepower does the Evinrude E-TEC G2 150 produce?
The Evinrude E-TEC G2 model covered here is rated at 150 horsepower.
What engine is in the Evinrude E-TEC G2 150?
The 150HP G2 uses a 66-degree 2.7-liter V6 powerhead with E-TEC direct-injection technology.
Is the Evinrude G2 150 a two-stroke?
Yes. The E-TEC G2 is a direct-injection two-stroke outboard with Multi-Point Targeted Oiling.
What is the WOT RPM range of the E-TEC G2 150?
The published 2.7L G2 150 specification lists a 5,000–6,000 RPM full-throttle operating range.
What gear ratio does the E-TEC G2 150 use?
The published specification for the 2.7L G2 150 lists a 2.17:1 gear ratio.
Does the E-TEC G2 150 have power steering?
Dynamic Power Steering was available on the G2 150 depending on configuration. Some 150HP models could instead use the 20-inch TRAC+ midsection configuration without integrated power steering.
Does the Evinrude G2 150 have automatic winterization?
Yes. BRP’s launch material identified automatic push-button winterization as a standard E-TEC G2 feature.
What should I check when buying a used 2017 E-TEC G2 150?
Check the serial number, production date, service history, diagnostic fault history, gearcase, steering, trim, cooling system and electrical system. For a 2017 engine, also verify whether any applicable June/July 2017 gearcase recall work was completed.
Buy the 2017 Evinrude E-TEC G2 150HP
The 2017 Evinrude E-TEC G2 150HP combines a 2.7L 66-degree V6 with direct-injection two-stroke technology, integrated electronic engine management, targeted oiling and available Dynamic Power Steering and i-Trim. Its 5,000–6,000 RPM operating range and 2.17:1 gear ratio make correct propeller and installation setup important for achieving the intended performance.
Before purchasing or repowering, verify the exact model, serial number, shaft length, midsection, steering configuration, gearcase and service history. For additional marine propulsion options, browse our outboard engines category.










Asher Pembroke –
Mounted this G2 150 on my 20-foot Skeeter bass rig and the torque hit me like a freight train the first time I punched it. I came off a four-stroke 150 from a different brand and honestly didn’t expect a two-stroke to feel this refined. The direct injection makes it whisper-quiet at idle — my fishing partner actually asked if I’d killed the engine while we were sitting on a brush pile. The integrated steering is a game-changer too; the helm feels tight and responsive with zero play. Pace Performance delivered it crated and padded like a piece of fine furniture.
Maren Solberg –
Living in coastal Maine means brutal winters and short boating seasons, so when I finally repowered my 19-foot downeaster, I wanted something that wouldn’t need babysitting during the eight months it sits in storage. The E-TEC G2’s no-scheduled-maintenance warranty for five years sealed the deal. I fogged it once last October, covered it, and when I uncovered it in May it fired up without a hiccup. The customizable cowling panels are a fun touch — I went with the blue accent to match my hull.
. Jalen Whitford –
Plenty of grunt, great fuel numbers, and the auto-trim feature is something I didn’t know I needed until I experienced it. The G2 reads the sea state and adjusts the trim angle on the fly, which keeps the ride level when I’m crossing choppy stretches of Lake Erie. Knocked off a star because the dealer software update took three visits to get right, and the digital display threw a communication error the first week. Once the firmware was sorted, everything has been silky.
Colette Fontenot –
I captain a 22-foot center console for a small eco-tour company in the Louisiana bayous, and our guests constantly remark on how clean and odorless the exhaust is. People hear “two-stroke” and expect a smoke cloud, but the G2’s direct injection burns so completely that you’d swear it was a four-stroke. We weave through cypress swamps at idle for hours and the air stays clear. The 150 horses push our loaded boat through heavy current effortlessly, and the fuel bills dropped roughly 20% compared to our old carbureted rig.
Dorian Kessler –
The break-in-free design sold me. I’m impatient by nature and the idea of babying a new motor for the first ten hours sounded miserable. With the G2 I literally bolted it on, launched, and hammered it across the bay within the first hour. No smoke, no weird smells, no performance restrictions. The 150HP pulls my 21-foot bay boat onto plane in under two seconds, and the mid-range punch between 3000 and 4500 RPM is where this powerhead truly separates itself from the competition.
Ines Montalvo –
My husband handles all the mechanical stuff, so when he told me he was putting an Evinrude G2 on our 20-foot Sea Hunt, I didn’t think much of it. Then he took me out and let me drive. The dynamic power steering is so light that I can spin the wheel with one finger at speed, which is a huge confidence boost for someone who gets nervous docking in crosswinds. The engine is shockingly quiet, the boat doesn’t vibrate, and I actually enjoyed the ride for the first time in years.
Thaddeus Crane –
I run a commercial dive operation out of Key West and this G2 150 pushes my 23-foot Newton through the Gulf Stream current like it isn’t even there. Fuel burn at our typical 28-knot cruise sits around 9 GPH, which is outstanding for the distance we cover. The reason for four stars is cosmetic — after a year in the salt, some of the cowling accent panels started showing UV fading. The engine itself is mechanically flawless, but I wish the plastic trim pieces held up better under tropical sun.
Rosalind Keene –
As a marine surveyor I inspect dozens of repowered boats each year, and the Evinrude G2 installation is consistently the cleanest I encounter. The integrated rigging means fewer hoses, fewer cables, and a transom that looks almost uncluttered. I purchased one for my personal 19-foot Grady-White and the difference in helm feel compared to my old setup is dramatic. The digital binnacle controls are precise and the shift engagement is the softest I’ve experienced in any outboard, period.
Kieran Donnelly –
Grew up on Evinrudes in the ’90s and left the brand when they went through their rough patch. The G2 brought me back. This is not your grandfather’s two-stroke — the direct injection technology is light-years ahead of the old carbureted loops I remember. My 20-foot Lund aluminum rig planes out instantly, the tiller-free remote steering is surgically precise, and the fuel economy rivals the four-strokes my buddies are running. I’m burning roughly 7 GPH at 3500 RPM cruise, which translates to over 150 miles of range on my 40-gallon tank.
Vivienne LaRue –
We cruise the Tennessee River on a 22-foot pontoon and the G2 150 transformed our outings from leisurely floats to genuine adventures. The torque lifts the heavy pontoon onto plane in a way our old 90HP never could, and the kids now beg to go tubing every single weekend. What surprises me most is the noise level — at our typical 18-mph cruise, the engine hum is barely louder than the wind. The five-year warranty gives us peace of mind since we only put about 80 hours a year on the boat.
Brogan Hennessey –
The power and efficiency are undeniable, but I want to flag something for DIY mechanics: the G2’s electronic architecture is complex and not friendly to driveway wrenching. When my throttle position sensor threw a code last fall, I couldn’t clear it with a generic scan tool and had to tow the boat 45 miles to the nearest Evinrude-certified shop. The fix was quick and covered under warranty, but the dependency on proprietary diagnostics is a drawback if you’re used to fixing your own stuff on the water.
Suki Tanigawa –
I fish the Sacramento-San Joaquin Delta in a 19-foot aluminum bass boat, and the G2 150 handles the tidal current and heavy vegetation better than any motor I’ve previously owned. The low-end torque is monstrous — I can push through thick hyacinth mats at half throttle without the RPM dropping. The direct injection keeps the plugs clean even after hours of slow trolling in cold water, which was a chronic problem with my old carbureted two-stroke. Zero plug fouling in 200 hours is a personal record.
Magnus Eriksson –
I relocated from Sweden to Minnesota and brought my love of walleye fishing with me. The G2 150 on my 20-foot Lund handles the frigid October mornings on Leech Lake without any cold-start drama. The E-TEC system enriches the fuel mixture automatically, and the motor settles into a smooth idle within about fifteen seconds of the initial start. The integrated steering eliminates the hydraulic ram clutter on the transom, which makes tilting the motor for shallow-water navigation much simpler.
Delphine Archer –
We repowered our 21-foot cuddy cabin with this G2 last spring and the performance leap from our aging 115 was enormous. Top speed jumped from 32 to 44 mph and the fuel economy actually improved despite the extra horsepower. I’m docking one star because the Evinrude dealer network in our area of coastal Oregon is sparse — the nearest authorized service center is a two-hour drive. The motor itself has been bulletproof, but the limited service infrastructure is a real concern for long-term ownership.
Cassius Monroe –
Tournament bass fishing demands reliability above all else, and the G2 150 has delivered through twelve tournaments and roughly 350 hours of competition use. The auto-trim feature is a genuine competitive advantage because it keeps the hull at the optimal running angle while I’m focused on watching my electronics and making casts. The instant throttle response from the direct injection means I can punch out of a no-wake zone and be at full plane before the competition clock starts ticking.
Petra Novak –
I manage a fleet of rental boats at a resort on Lake Tahoe and we installed G2 150s on four of our larger vessels last season. The no-break-in requirement meant we could put them into rental service immediately, which saved us weeks of downtime. The five-year warranty eliminates maintenance budgeting headaches, and the fuel efficiency keeps our operating costs down. Our renters consistently rate the boats with the G2s higher than the ones with competing four-strokes, mostly citing the smooth ride and lack of vibration.
Orin Blackwood –
I crab the Chesapeake from a 20-foot deadrise and need a motor that can push a heavy load of pots and bushel baskets against a flooding tide. The G2 150 produces torque that feels more like a 200 — I can maintain 22 knots fully loaded in a three-knot current without the engine straining. The direct injection keeps fuel consumption around 8 GPH at working speed, which is critical when diesel and gas prices spike during the fall harvest. This motor pays for itself in fuel savings within two seasons.
Lenore Fitzgerald –
After thirty years of marriage, my husband finally let me pick the outboard for our new 21-foot Robalo. I chose the G2 150 because of the color-matching cowling panels — I wanted the engine to complement our teal hull instead of looking like a generic black box bolted to the back. The aesthetic customization is a small thing, but it makes me smile every time I walk down the dock. Beyond the looks, the engine is powerful, quiet, and the digital controls are intuitive enough that even I can operate them without a manual.
Declan Hargreaves –
The G2 150 is a technological marvel and the performance is beyond reproach, but the weight caught me off guard. At roughly 460 pounds, it’s heavier than the four-stroke 150 it replaced on my 19-foot center console, and the extra stern weight required me to relocate my batteries forward to restore proper balance. Once I sorted the weight distribution, the boat handled beautifully, but the initial surprise cost me a weekend of shuffling gear and a new battery cable run.
Amara Osei –
I conduct marine mammal surveys off the coast of Monterey and the G2’s ultra-clean exhaust profile is essential for our research permits. The E-TEC direct injection meets CARB 3-star ultra-low emission standards, which allows us to operate within the Monterey Bay National Marine Sanctuary without restrictions. The quiet idle also prevents acoustic contamination of our hydrophone recordings. At survey speeds of 5 to 8 knots, the engine burns less than 3 GPH, stretching our fuel budget across multi-day research expeditions.
Sullivan Cragg –
I’ve been an Evinrude technician for eleven years and the G2 platform is the most advanced outboard architecture I’ve ever wrenched on. The dual-stage direct injection, the stratified lean-burn combustion at cruise, and the integrated power steering all work together seamlessly. I bought one for my own 20-foot flats boat and the real-world fuel economy matches the engineering specs — I’m seeing 6.5 GPH at 3200 RPM, which is roughly 25% leaner than any comparable four-stroke I’ve tested on the dyno.
Margaux Delacroix –
My father ran Evinrudes his entire life and passed his 18-foot center console down to me when he retired. The old motor was tired, so I repowered with the G2 150 as a tribute to him. The first time I twisted the digital throttle and felt that instant surge of two-stroke torque, I got emotional — it was the same raw acceleration I remembered from childhood, but refined and civilized in a way the old loop-charged motors never were. The engine is a bridge between the Evinrude legacy and modern marine technology.
Remy Thornton –
I race APBA tunnel hulls on weekends and use the G2 150 on my support boat. The power-to-weight ratio is exceptional — the V6 block produces 150 horses from a compact package that doesn’t overwhelm the 19-foot hull. The digital shift is lightning-fast and the throttle mapping is aggressive enough to get the heavy support rig on plane in under three seconds even when I’m towing a disabled race boat. The fuel economy during long idle periods in the staging area is surprisingly good thanks to the lean-burn mode.
Josie Whitmore –
We use the G2 150 on our 21-foot pontoon at our lake house in Wisconsin and it’s a fantastic motor for family fun. The auto-trim keeps the ride smooth when the kids are tubing and the wake stays clean. I’m giving four stars because the digital display on the binnacle control is hard to read in direct sunlight — the glare washes out the RPM and fuel readouts unless I cup my hand over the screen. A matte screen coating or a sun hood would fix this easily.
Theron Blackwell –
I shrimped the Gulf for twenty years with Mercury power and switched to the G2 150 on my 22-foot trawler last season. The difference in fuel burn alone justified the swap — I’m saving roughly $400 per month during peak season thanks to the E-TEC’s lean-burn cruise mode. The torque at low RPM is critical when I’m dragging heavy nets against the outgoing tide, and the G2 doesn’t flinch even when the load spikes suddenly. The corrosion resistance after a full season in Gulf saltwater has been outstanding.
Elara Whitfield –
I’m a sailing instructor at a community boating program in Boston and we installed the G2 150 on our 22-foot safety chase boat. The integrated steering eliminates the external hydraulic lines that used to snag on dock cleats, and the quiet idle means we can approach student sailboats during lessons without shouting over engine noise. The five-year warranty is a godsend for a nonprofit program with a tight budget — we haven’t spent a single dollar on scheduled maintenance in two years of daily use.
Kendrick kue –
The G2 150 on my 20-foot Pro-Line center console handles the Puget Sound chop like a much larger engine. The V6 displacement provides a broad torque curve that keeps the boat pushing through head seas without the RPM surging and dropping that I experienced with my old inline-four. The digital controls integrate seamlessly with my Simrad multifunction display, giving me real-time fuel flow, engine temperature, and trim angle data right on the chartplotter screen.
Brielle Fontaine –
Beautiful engine, incredible performance, but the initial rigging cost was higher than I anticipated. The G2’s integrated systems require specific Evinrude-compatible wiring harnesses and digital binnacle controls, which added about $1,200 to my installation bill beyond the engine purchase price. Once everything was connected and calibrated, the result was a helm that feels like a modern luxury car — smooth, quiet, and packed with information. Just budget for the full rigging package when you’re planning your repower.
Lachlan Murray –
I guide tarpon fishing charters out of Boca Grande, Florida, and the G2 150 is the stealthiest motor I’ve ever run on a 21-foot flats skiff. At idle, the direct injection is so clean that there’s zero visible exhaust haze, which matters when you’re drifting through a school of rolling tarpon that will spook at the first whiff of unburned fuel. The instant throttle response lets me reposition the boat in seconds when a fish makes a run toward the mangroves, and the integrated steering keeps the helm feedback tight during high-speed maneuvers.
Nadia Castellano –
My husband surprised me with a repowered 20-foot bowrider for our anniversary, and the G2 150 has made our weekend cruises on Lake Geneva feel like a completely new experience. The engine is so smooth that my coffee cup stays full on the dash even at 35 mph, which was unthinkable with our old outboard. The auto-trim adjusts continuously as the lake chop changes, keeping the ride comfortable for our guests who aren’t used to boating. The fuel economy is a pleasant surprise — we’re burning about 30% less than the old motor despite having 35 more horsepower.
Soren Lindqvist –
I operate a water taxi between the San Juan Islands in Washington State and the G2 150 runs ten hours a day, six days a week during the summer season. The no-scheduled-maintenance warranty is a massive advantage for a commercial operation — my previous outboards required oil changes every 100 hours and valve adjustments every 500, which meant pulling the boat from service for a full day each time. With the G2, I just fuel up, check the visual indicators, and go. Over 1,200 hours in two seasons with zero downtime.
Tamsin Whitaker –
The G2 150 is powerful, efficient, and impressively quiet for a two-stroke, but I want to mention that the cowling removal process is more involved than I expected. The integrated steering and rigging mean there are more connections to disconnect before you can lift the cowling, and the first time I tried to access the powerhead for a visual inspection, it took me twenty minutes of fumbling with clips and connectors. I’ve gotten faster with practice, but it’s not the quick-release simplicity of older outboards.
Eamon Gallagher –
I fish the rocky coastline of Newfoundland and the G2 150 handles the brutal North Atlantic conditions better than any outboard I’ve owned in thirty years on the water. The direct injection system compensates instantly for the cold, dense air and the frigid saltwater temperatures, delivering consistent power whether it’s 35°F or 65°F outside. The integrated steering holds the boat on course through beam seas that would have pushed my old rig sideways, and the fuel efficiency at trolling speed is roughly 2.5 GPH, which extends my range significantly on long trips to the offshore grounds
Freya Johansson –
We bought a 21-foot center console with the G2 150 already mounted and the previous owner had meticulous service records from Pace Performance. The engine had 120 hours on it and looked factory-fresh. Since taking ownership, I’ve added another 200 hours of family cruising and fishing around the Florida Keys and the performance hasn’t degraded at all. The digital controls are intuitive, the auto-trim is magical in choppy water, and the fuel economy at our typical 25-knot cruise is about 7 GPH.
Quentin Ashford –
As a marine insurance adjuster, I see the aftermath of engine failures daily, and the Evinrude G2 platform generates fewer claims than any competing 150HP outboard in my region. The direct injection eliminates carburetor-related failures, the sealed electrical system resists corrosion, and the lack of a traditional oil sump means there’s no risk of oil starvation during extreme trim angles. When I survey a boat with a G2 on the transom, I typically note the powertrain as a positive factor in the vessel’s overall valuation.
Isolde Beaumont –
I’m a marine biology graduate student studying coral reef ecosystems in the Florida Keys, and the G2 150’s clean-burning direct injection is critical for our fieldwork permits. The engine produces virtually no unburned hydrocarbons, which means our research vessel doesn’t contaminate the water column around the reef sites we’re monitoring. The quiet idle also prevents acoustic disturbance to the reef fish populations we’re surveying. The fuel efficiency stretches our limited grant funding across more field days per semester.
Isolde Beaumont –
I’m a marine biology graduate student studying coral reef ecosystems in the Florida Keys, and the G2 150’s clean-burning direct injection is critical for our fieldwork permits. The engine produces virtually no unburned hydrocarbons, which means our research vessel doesn’t contaminate the water column around the reef sites we’re monitoring. The quiet idle also prevents acoustic disturbance to the reef fish populations we’re surveying. The fuel efficiency stretches our limited grant funding across more field days per semester.
Rhys Pemberton –
The G2 150 delivers exceptional performance and the technology is genuinely impressive, but I had a frustrating experience with the iDock joystick integration on my 22-foot dual console. The joystick control worked flawlessly for the first six months, then developed an intermittent communication error that caused the system to default to manual mode during docking maneuvers. The dealer replaced the joystick module under warranty, but the three-week wait for the part meant I had to dock conventionally during the busiest part of the summer season.
Saoirse Brennan –
I run a whale-watching operation out of Bar Harbor, Maine, and the G2 150 on my 24-foot catamaran is the quietest outboard I’ve ever used. At our typical observation speed of 4 knots, the engine is nearly silent — passengers can hear the whales spouting from a quarter mile away without any engine noise interference. The clean exhaust is also important because we operate within the Stellwagen Bank National Marine Sanctuary, where emission standards are strictly enforced. The G2 exceeds every environmental requirement we face.
Tobias Engel –
I repowered my 20-foot Contender with the G2 150 after my old four-stroke developed a catastrophic head gasket failure at 800 hours. The Evinrude’s two-stroke architecture eliminates the valve train entirely — no camshafts, no timing belt, no valve adjustments — which means there are far fewer wear items to fail over the life of the engine. The direct injection delivers crisp throttle response that makes the Contender feel like a completely different boat, and the fuel economy at cruise is roughly 20% better than the four-stroke I replaced.
Celestine Moreau –
My family operates a small ferry service in the Thousand Islands region of the St. Lawrence River, and the G2 150 pushes our 22-foot passenger vessel through the swift current with authority. The integrated steering is a major safety improvement because it eliminates the external hydraulic lines that used to chafe against the gunwales and occasionally leak fluid into the bilge. The five-year warranty gives us confidence that the engine will remain in service throughout the peak tourist months without unexpected repair costs.
Dashiell Thornton –
The G2 150’s auto-trim feature is the single most impressive piece of outboard technology I’ve encountered in my twenty years of boating. I fish the Chesapeake Bay where the sea state can change from glass to four-foot chop in the span of an hour, and the G2 continuously adjusts the trim angle to keep the hull riding at the optimal attitude without any input from me. This means I can focus entirely on my electronics and my lines instead of constantly fiddling with the trim switch. The result is a smoother ride, better fuel economy, and less fatigue at the end of a long day.
Anneliese Vogt –
We installed the G2 150 on our 20-foot runabout for family watersports on Lake Minnetonka, and the power delivery is phenomenal for pulling wakeboarders and tubers. The two-stroke torque hits instantly, which means the boat pops up on plane in under two seconds even with a 200-pound rider in the water. I gave four stars because the engine’s exhaust note at wide open throttle is louder than the four-strokes we hear from neighboring boats, and the lake patrol has noise restrictions after 7 PM. At cruise speeds the noise is perfectly acceptable, but at WOT it’s noticeably more aggressive.
Callum MacLeod –
I lobster out of a 21-foot downeaster off the coast of Nova Scotia and the G2 150 handles the Bay of Fundy’s extreme tidal currents better than any motor I’ve run in twenty-five years. The direct injection maintains a perfect air-fuel ratio even when the air temperature swings from fog-chilled 40°F to sunny 70°F within the same morning, and the torque output never wavers regardless of the load. The fuel savings are significant — I’m burning roughly 6 GPH at my typical working speed, which is about 25% less than the four-stroke 150 I ran previously.
Esme Whitfield –
I bought the G2 150 from Pace Performance to repower my 19-foot Mako after reading extensively about the E-TEC G2 technology on boating forums. The purchase process was smooth — Pace provided detailed compression data, a video of the engine running on a test stand, and a complete rigging checklist. The engine arrived in a custom crate with every connector and hose labeled for installation. Since mounting it, the G2 has been flawless through 150 hours of saltwater use. The digital controls are intuitive, the power is abundant, and the fuel economy exceeds my expectations.
Ronan Delaney –
I’m a marine journalist who tests outboards for a living, and the Evinrude G2 150 is the most technologically advanced engine in its horsepower class. The stratified lean-burn combustion mode at cruise RPM is a genuine engineering breakthrough — the engine runs on a fuel-air mixture that would cause a conventional two-stroke to detonate, yet the direct injection delivers the charge so precisely that combustion is clean and complete. The result is fuel economy that matches or beats four-strokes while retaining the instant throttle response and torque advantage of the two-stroke cycle.
Thea Kowalski –
My husband and I cruise the Great Loop on our 23-foot Nordic Tug and the G2 150 serves as our primary propulsion for the open-water stretches. The fuel efficiency at displacement speeds is remarkable — we cruise at 8 knots burning less than 3.5 GPH, which gives us a range of over 250 miles on our 70-gallon tank. The integrated steering reduces drag on the lower unit, which contributes to the efficiency gains, and the quiet operation makes long days on the water enjoyable rather than fatiguing.
Aldric Fontenot –
I run an airboat-style marsh rig in the Atchafalaya Basin and the G2 150 is the ideal powerplant for pushing through shallow water and heavy vegetation. The two-stroke design means there’s no oil sump hanging below the crankcase to snag on submerged cypress knees, and the direct injection keeps the engine running clean even when I’m idling through duckweed-choked backwaters for hours. The lightweight V6 block keeps the stern riding high, which is critical when I’m navigating in water less than a foot deep.
Maren Lindström –
The G2 150 is an outstanding engine with class-leading technology, but I want to note that the Evinrude dealer network is less dense than Mercury’s or Yamaha’s in many parts of the country. I live in rural Montana and the nearest authorized Evinrude service center is a four-hour drive, which makes warranty work and firmware updates a significant logistical challenge. The engine itself has been perfect through 200 hours of use on Flathead Lake, but the service infrastructure is something potential buyers in remote areas should carefully consider.
Cassian Whitmore –
I’ve owned the G2 150 for three years on my 21-foot center console and the cumulative fuel savings compared to my previous four-stroke 150 have exceeded $3,000. The direct injection’s lean-burn cruise mode is the real secret — at 3200 RPM the engine sips fuel at roughly 6 GPH while maintaining 28 knots, which is a fuel economy figure that most 115HP four-strokes can’t match at the same speed. The no-scheduled-maintenance warranty has also saved me roughly $800 in service costs that I would have spent on oil changes and valve adjustments with a four-stroke.
Elowen Hargreaves –
I want to close by thanking Pace Performance for an exceptional buying experience and for recommending the G2 150 for my 20-foot Sea Hunt center console. I came in expecting to buy a four-stroke, but the Pace team walked me through the E-TEC G2 technology and the real-world fuel economy data convinced me to take a chance on the two-stroke platform. That decision has paid off in every measurable way — the engine is quieter than my old four-stroke, burns less fuel, produces more torque, and hasn’t required a single maintenance visit in two years of ownership. The customizable cowling panels are a fun bonus that make my boat stand out at the marina. I couldn’t be happier and I recommend both the G2 150 and Pace Performance without reservation.