Battery sizing begins with the trip, not the largest battery that fits the boat. The goal is to estimate the energy needed for the planned operating profile, include a sensible reserve and then select a battery configuration approved by the motor manufacturer.
Step 1: Define the trip
Record expected running time, cruising speed, passenger and equipment load, route distance, return requirements and likely weather or current. Separate high-power manoeuvring from normal cruising where reliable data is available. Do not size only for a one-way trip if the boat must return without charging.
Step 2: Estimate average power
Use the motor manufacturer’s performance information at the speed and load you expect. Maximum motor rating is not the same as average power consumption. If the motor draws an average of 1.5 kW during a planned two-hour trip, estimated energy use is 3 kWh before reserve and system considerations.
Step 3: Add reserve and account for usable capacity
Choose a reserve based on route exposure, access to shore, weather variability and the consequences of running low. If the trip requires 3 kWh and your planning reserve is 30%, a simple planning target is 3.9 kWh of usable energy. The battery’s nominal capacity may need to be higher because the manufacturer may restrict usable discharge. This example is illustrative, not a universal reserve rule.
Step 4: Check voltage and approved configurations
Battery voltage must match the motor system’s approved requirements. Do not select batteries solely by multiplying voltage and amp-hours. Confirm compatible chemistry, battery management, communication, charger, cable, fuse or breaker, isolation and connector specifications. Multiple batteries must be configured exactly as approved.
Step 5: Check weight and space
Calculate the total installed battery weight and confirm the boat’s load and trim limits. Plan secure mounting, protection from water, access for inspection and cable routing. A battery bank that meets the energy target but overloads the boat is not a suitable solution.
Illustrative calculation
Assume a boat uses an average of 2 kW for 1.5 hours. Estimated trip energy is 3 kWh. Add a planning margin of 25% to reach 3.75 kWh usable energy. If a selected battery permits only 80% of nominal capacity to be used, the nominal capacity required would be about 4.69 kWh. Actual figures must come from the exact motor and battery data sheets, and the chosen system must be manufacturer-approved.
Before buying
- Confirm continuous and peak power requirements.
- Verify usable battery energy and permitted discharge.
- Check charger output and charging access.
- Include battery weight in the boat’s loading calculation.
- Ask a qualified marine electrician to review protection and installation.
Our battery guide explains capacity and runtime, while the range guide covers real-world operating factors. Start with the electric outboard motors guide for the complete buying process.